Electrical System

Warning Lamp Unit

~1min read

PROCEDURE

Блок контрольных

Warning Lamp Unit 1 – housing; 2 – panel with bulb holders; 3 – connector; 4 – latch

The warning lamp unit is installed on the instrument cluster trim between the switches. PROCEDURE 1. To remove the unit, remove the rear window defogger switch and the hazard warning switch without disconnecting their wiring.

Ultrasound apparatus for veterinary use, veterinary ultrasound machine.

2. Then, through the openings where the switches were installed, press latches 4 to release them, and remove the lamp unit from the instrument panel. 3. Disconnect connector 3 from the lamp unit.

4. Remove panel 2 with the warning lamp bulb holders from housing 1 of the unit.

5. Install the warning lamp unit in the reverse order of removal.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.