Electrical System

Headlamp Aim Check

~1min read

PROCEDURE

WARNING Headlamp aiming requires special equipment and must be performed at a service station.

PROCEDURE 1. Adjust the tire pressure to the specified values. 2. Fill the fuel tank to at least 90%. 3. Park the vehicle on a level surface 10 m from a wall. 4. Load the vehicle with a 75 kg weight (one person in the driver's seat). 5. Measure the distance from the center of the headlamp to the ground. 6. Mark a line on the wall at the distance measured in the previous step. 7. Turn on the low beams. 8. Measure on the wall the distance between the marked line and the edge of the light beam: for standard headlamps the beam edge must be 120 mm below the line; for fog lamps, 200 mm.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.