Windshield Wiper - Wiper Arm

PROCEDURE

Windshield Wiper 1 – bracket; 2 – shaft housing; 3 – shaft with drive arm; 4 – electric motor with gearbox; 5 – rubber bushing; 6 – wiper mounting bolt; 7 – washer; 8 – spacer bushing; 9 – wiper link; 10 – nut; 11 – spring washer; 12 – nut; 13 – decorative cap; 14 – wiper arm; 15 – wiper blade; 16 – motor mounting bolt; 17 – nut; 18 – arm

Installing the Windshield Wiper Arms a = 55 mm; b = 59 mm

Removal PROCEDURE 1. Set wiper blade 15 to the lowest position. 2. Flip up decorative cap 13. 3. Unscrew nut 12. 4. Remove spring washer 11. 5. Remove arm 14. Installation PROCEDURE 1. Position wiper arm 14 as shown in the illustration. Installing the Windshield Wiper Arms. 2. Install spring washer 11 (see illustration Windshield Wiper). 3. Tighten nut 12 to 9 N·m. 4. Install decorative cap 13.