Electrical System
Front Turn Signal Bulb Replacement
In this manual: Electrical System
~1min read
PROCEDURE

Front Turn Signal 1 – screw; 2 – lens
PROCEDURE 1. Unscrew screws 1. 2. Remove turn signal lens 2. 3. Remove the bulb socket with the bulb and the reflectors. 4. Press the bulb in, turn it, and remove it from the socket. 5. Insert the new bulb into the socket and turn it until it stops. 6. Insert the socket with the bulb, aligning the reflector with the slots in the housing. 7. Install lens 2. 8. Tighten screws 1.
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?