Navigation / Multi-Display

How to Use Troubleshooting

~4min read

PRECAUTION / NOTICE / HINT

HINT:

  • Follow the procedure below to troubleshoot the navigation system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

  • When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
  • Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
  • The following 5 elements are essential for analyzing the problem:

    What

    Vehicle model, system name

    When

    Date, time, frequency of occurrence

    Where

    Road conditions

    What were the conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem Symptoms

NEXT
  1. CHECK BATTERY

(a) Measure the battery voltage.

Standard voltage:

11 à 14 V

HINT:

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

NEXT
  1. CHECK INTERIOR

(a) Make sure that the conditions for condensation to form inside the cabin are limited and that the temperature there is neither too high nor too low.

OK:

The conditions for condensation to form are limited, and the temperature is neither too high nor too low.

HINT:

  • A humid cabin and rapid temperature changes can easily cause condensation to form. Condensation inside the cabin may cause a short circuit.
  • The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65 °C or higher.
NG

PROPERLY ADJUST THE CABIN TEMPERATURE

OK
  1. CHECK NAVIGATION SYSTEM NORMAL OPERATING CONDITIONS

(a) Refer to the "Check System Normal Operating Conditions" section.

Click here

Result:

Result

Proceed to

The symptom is not normal operation.

A

The symptom is normal operation.

B

B

END

A
  1. CHECK CAN COMMUNICATION SYSTEM*

(a) Check whether CAN communication system DTCs are output.

Click here

Result:

Result

Proceed to

No CAN system DTCs are output.

A

CAN-related DTCs are output.

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. CHECK DTCs*

(a) Check the DTCs.

Body Electrical > Navigation System > Trouble Codes

Result:

Result

Proceed to

DTCs are output.

A

No DTCs are output.

B

B

GO TO STEP 11

A
  1. CLEAR DTCs*

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

HINT:

Depending on the vehicle operating conditions, current DTCs may not indicate actual malfunctions.

NEXT
  1. CHECK WHETHER OTHER DTCs ARE OUTPUT*

(a) Check the DTCs again.

Body Electrical > Navigation System > Trouble Codes

Result:

Result

Proceed to

DTCs are output.

A

No DTCs are output.

B

HINT:

  • Even if the problem symptom is not confirmed, check the DTCs. The system stores previous DTCs in memory.
  • For more information, perform another check using the "System Check Mode" screen after rechecking the DTCs with the Techstream.
  • Check the DTCs and the area indicated by the code.
B

GO TO STEP 11

A
  1. DTC CHART

(a) Find the output DTC in the diagnostic trouble code chart.

Click here

NEXT

GO TO STEP 13

  1. SYMPTOM TROUBLESHOOTING TABLE

(a) Refer to the Symptom Troubleshooting Table.

Click here

Result:

Result

Proceed to

The malfunction is not listed in the Symptom Troubleshooting Table.

A

The malfunction is listed in the Symptom Troubleshooting Table.

B

HINT:

If the symptoms do not recur and no DTC is output, try to reproduce the symptoms.

Click here

B

GO TO STEP 13

A
  1. TROUBLESHOOT BASED ON PROBLEM SYMPTOM

(a) Refer to the ECU terminals.

Click here

NEXT
  1. CHECK THE CIRCUIT

(a) Make any necessary adjustments, repairs or replacements.

NEXT
  1. CHECK WHETHER OTHER DTCs ARE OUTPUT*

(a) After clearing the DTCs, check again for any DTCs.

Body Electrical > Navigation System > Clear DTCs Body Electrical > Navigation System > Trouble Codes
NEXT
  1. PERFORM CONFIRMATION TEST

NEXT

END