Navigation / Multi-Display

Navigation Processor Malfunction (B15AD)

~1min read

DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation ECU.

DTC No.

Detection Item

DTC Detection Condition

Suspected Area

B15AD

Navigation processor malfunction

When one of the following conditions is met:

  • A short to ground, short to +B, or open in the gyro sensor signal circuit.
  • Gyro Sensor Malfunction

Navigation ECU

PRECAUTION / NOTICE / HINT

NOTICE:

When replacing the navigation ECU, always replace it with a new one. If a navigation ECU that was installed on another vehicle is reused, the following may occur:

  • A communication malfunction DTC may be stored.
  • The navigation ECU may not operate normally.

PROCEDURE

  1. CHECK DTCs

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

(b) Check DTCs again and confirm that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes

OK:

No DTC is output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE NAVIGATION ECU