Navigation / Multi-Display
Precautions
In this manual: Navigation / Multi-Display
~1min read
PRECAUTION
PRECAUTIONS FOR NAVIGATION SYSTEM
NOTICE:
- When replacing the radio and display receiver assembly or the navigation ECU, always replace it with a new part. If a radio and display receiver assembly or navigation ECU previously installed on another vehicle is reused, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly or navigation ECU may not operate correctly.
- When replacing the DCM (Telematics Transceiver), be sure to replace it with a new part.
- After replacing the radio and display assembly, if the message "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display screen, update the software of the navigation ECU.
- After replacing the navigation ECU, if the message "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display screen, update the software of the radio and display receiver assembly.
(a) When replacing any of the following parts, refer to the repair initialization instructions.
Click here![]()
- Radio and Display Receiver Assembly*1
- DCM (Telematics Transceiver)
- *1: After replacing the radio and display receiver assembly on vehicles subscribed to paid satellite radio broadcasts, it is necessary to register the SiriusXM Radio ID (with SXM function).
Was this page helpful?