Navigation / Multi-Display

Data List / Active Test

~2min read

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.

HINT:

The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch to ON (IG).

(c) Turn on the Techstream.

(d) Select the following menus: Body Electrical / Navigation System / Data List.

(e) Read the Data List by following the instructions on the Techstream.

Body Electrical > Navigation System > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

Battery Voltage

Battery voltage

Min.: 0 V, Max.: 24 V

11 à 14 V

-

Active Dimmer

Active dimmer function

ON or OFF

ON: Dimmer function activated

OFF: Brightness control function disabled

-

Tail Light SW

Tail Light Switch

ON or OFF

ON: Light control switch in TAIL or HEAD position

OFF: Light control switch in OFF or AUTO position

-

Reverse Signal

Reverse signal

ON or OFF

ON: Shift lever in R position

OFF: Shift lever in a position other than R

-

Parking Brake

Parking Brake Switch

ON or OFF

ON: Parking brake applied

OFF: Parking brake released

-

Ignition

Engine Switch

ON or OFF

ON: Engine switch in ON (IG)

OFF: Engine switch in OFF or ON (ACC)

"OFF" is displayed even after the engine switch has been placed in ON (ACC)

Vehicle Speed

Maximum value for wheel speed sensor

Min.: 0 km/h, Max.: 255 km/h

Vehicle stopped: 0 km/h

When vehicle is driving at constant speed: No large fluctuation

HDMI Line(Blu-ray Disc Player)

-

Connected or disconnected

Disconnected

Unavailable