HD Radio Tuner Malfunction (B1551,B158D,B15B0,B15B3,B15B7,B15BA)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B1551 |
HD Radio Tuner Malfunction |
When one of the following conditions is met:
|
Radio and Display Receiver Assembly |
B158D |
Video Signal Stop |
Radio and Display Assembly Internal Video Signal Stop |
Radio and Display Receiver Assembly |
B15B0 |
Display Screen Malfunction |
Image Circuit (TFT Unit) Malfunction |
Radio and Display Receiver Assembly |
B15B3 |
Radio Tuner Malfunction |
When one of the following conditions is met:
|
Radio and Display Receiver Assembly |
B15B7 |
Bluetooth Module Malfunction |
"Bluetooth" Module Malfunction |
Radio and Display Receiver Assembly |
B15BA |
XM Tuner Malfunction |
When one of the following conditions is met:
|
Radio and Display Receiver Assembly |
PRECAUTION / NOTICE / HINT
NOTICE:
- Depending on the parts replaced during vehicle inspection or maintenance, initialization, registration or calibration may be required. Refer to the precautions for the navigation system.
Click here
.gif)
- When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly that was installed in another vehicle is reused, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
PROCEDURE
CHECK DTCs
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Check DTCs again and confirm that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTC is output.
| OK | USE SIMULATION METHOD TO CHECK |
| NG | REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |