Navigation / Multi-Display
Expansion Module 2 Malfunction (B1556)
In this manual: Navigation / Multi-Display
~1min read
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation ECU.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B1556 |
Expansion module 2 malfunction |
When one of the following conditions is met:
|
Navigation ECU |
PRECAUTION / NOTICE / HINT
NOTICE:
When replacing the navigation ECU, always replace it with a new one. If a navigation ECU that was installed on another vehicle is reused, the following may occur:
- A communication malfunction DTC may be stored.
- The navigation ECU may not operate normally.
PROCEDURE
CHECK DTCs
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Check DTCs again and confirm that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTC is output.
| OK | USE SIMULATION METHOD TO CHECK |
| NG | REPLACE NAVIGATION ECU |
Was this page helpful?