Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
HINT:
The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / Telematics / Data List.
(e) Depending on the Techstream display, check the "Data List".
Body Electrical > Telematics > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Emergency Switch |
Manual (SOS) Switch |
OFF or ON |
OFF: Manual (SOS) switch not pressed ON: Manual (SOS) switch pressed |
- |
Current Com Back-Up Battery |
Back-Up Battery (BUB) Installation History |
without or with |
without: This DCM (telematics transceiver) has no record that a BUB (back-up battery) has ever been connected. with: The BUB (back-up battery) was connected at some point (this does not guarantee that the BUB (back-up battery) is currently connected). |
- |
MIN |
Telephone number to be assigned to the telematics (for communication support) |
Display telephone number for communication support |
Display telephone number for communication support |
- |
MDN |
Telephone number to be assigned to the telematics (for the customer) |
Display telephone number for the customer |
Display telephone number for the customer |
- |
MEID |
Only the MEID (Mobile Equipment Identifier) is displayed on the Techstream. Module serial number to be assigned to the mobile module in the telematics. |
Display mobile module identification code number |
Display mobile module identification code number |
- |
Number of Trouble Codes |
The number of DTCs currently output |
Min.: 0 to Max.: 255 |
Display number of DTCs |
- |