Mobile Communication

Diagnostic System

~1min read

DIAGNOSTIC SYSTEM

DESCRIPTION

(a) The DCM (telematics transceiver) controls the functions of the vehicle's Safety Connect system. Safety Connect system data and diagnostic trouble codes (DTCs) can be read via the vehicle's Data Link Connector 3 (DLC3). In some cases, a malfunction may occur in the Safety Connect system. If the system does not appear to operate properly, check for possible malfunctions using the Techstream and make repairs as necessary.

CHECK DLC3

(a) Check DLC3.

Click here

CHECK BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery.

CHECK WARNING LIGHT

(a) When a malfunction is detected in the Safety Connect system, the red indicator on the Manual (SOS) switch illuminates to inform the driver of the malfunction.

Click here