Mobile Communication
DCM (Telematics Transceiver) Malfunction (B15A8)
In this manual: Mobile Communication
~1min read
DESCRIPTION
This DTC is output when the DCM (telematics transceiver) self-diagnosis detects an error in the EEPROM or PLL IC. The EEPROM (Electrically Erasable Programmable Read-Only Memory) stores various data to operate the Safety Connect system. The PLL IC (Phase Locked Loop Integrated Circuit) oscillates the radio frequency of the telephone.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
B15A8 |
DCM (Telematics Transceiver) Malfunction |
Error detected in EEPROM or PLL IC. |
DCM (Telematics Transceiver) |
PRECAUTION / NOTICE / HINT
NOTICE:
Whether DTC B15A8 is output as a current DTC or in the DTC history, the DCM (telematics transceiver) must be replaced.
PROCEDURE
REPLACE DCM (DATA COMMUNICATION MODULE)
(a) Replace the DCM (telematics transceiver).
Click here![]()
NOTICE:
- The ignition switch must be in the OFF position.
- Do not swap the DCM (telematics transceiver) with a DCM from another vehicle.
| NEXT | PERFORM DCM ACTIVATION |
Was this page helpful?