Mobile Communication

Initialization

~1min read

INITIALIZATION

RESET BACKUP BATTERY STATUS

HINT:

If the backup battery has been replaced, the backup battery status reset procedure must be performed.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menus: Body Electrical / Telematics / Utility / Backup Battery Replacement Reset

Body Electrical > Telematics > Utility

Backup Battery Replacement Reset

(e) Depending on the Techstream display, perform the Backup Battery Replacement Reset to reset the mobile phone battery replacement indicator.