Mobile Communication
Red Indicator Light Stays On
In this manual: Mobile Communication
~1min read
DESCRIPTION
This means that the DCM (telematics transceiver) has detected a malfunction in the security system connection and has stored a DTC.
PROCEDURE
CHECK DTCs
(a) Turn the ignition switch OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON and wait for 10 seconds.
(d) Turn on the Techstream.
(e) Perform the "Health Check" and check the current DTCs.
Click here![]()
Result:
Result | Proceed to |
|---|---|
No DTCs are output |
A |
DTCs are output |
B |
| B | GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
REPLACE DCM (DATA COMMUNICATION MODULE)
(a) Replace the DCM (telematics transceiver).
Click here![]()
NOTICE:
- The ignition switch must be in the OFF position.
- Do not swap the DCM (telematics transceiver) with a DCM from another vehicle.
| NEXT | PERFORM DCM ACTIVATION |
Was this page helpful?