Mobile Communication

ECU Terminals

~6min read

ECU TERMINALS

CHECK DCM (TELEMATICS TRANSCEIVER)

*a

Connector color: Natural (to auxiliary phone antenna)

*b

Connector color: Blue (to main phone antenna)

*c

Connector color: Gray (to GPS antenna)

-

-

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

F134-1 (+B) - F134-4 (E)

W - W-B

Battery power supply

Always

11 à 14 V

F134-2 (SPI+) - F134-4 (E)

LA-LG - W-B

Buzzer signal

Audio system operates

The output waveform is synchronized with the output sound

F134-3 (SPI-) - F134-4 (E)

LA-L - W-B

Buzzer signal

Audio system operates

The output waveform is synchronized with the output sound

F134-4 (E) - Body ground

W-B - Body ground

Ground

Always

Below 1 V

F134-5 (SPO+) - F134-4 (E)

LA-LG - W-B

Buzzer signal

Audio system is operating or in emergency call mode

The output waveform is synchronized with the output sound

F134-6 (SPO-) - F134-4 (E)

LA-L - W-B

Buzzer signal

Audio system is operating or in emergency call mode

The output waveform is synchronized with the output sound

F134-7 (IG2) - F134-4 (E)

B - W-B

IG power supply

Ignition Switch in ON position

11 à 14 V

Ignition Switch in OFF position

Below 1 V

F134-8 (ACC) - F134-4 (E)

GR - W-B

ACC power supply

Ignition Switch in ACC position

11 à 14 V

Ignition Switch in OFF position

Below 1 V

F134-9 (SLED) - F134-4 (E)

LG - W-B

Manual (SOS) switch illumination power supply

Ignition Switch in ACC position

11 à 14 V

Ignition Switch in OFF position

Below 1 V

F134-11 (IND1) - F134-4 (E)

B - W-B*3

P - W-B*4

Manual (SOS) switch red indicator illumination signal

For 2 seconds after turning the ignition switch to ON

1 à 8,5 V

Ignition Switch in OFF position

Below 1 V

F134-12 (IND2) - F134-4 (E)

BE - W-B

Manual (SOS) switch green indicator illumination signal

For 2 seconds after turning the ignition switch to ON

1 à 8,5 V

Ignition Switch in OFF position

Below 1 V

F134-15 (CANP)

GR

CAN communication signal

-

-

F134-16 (CANN)

LG

CAN communication signal

-

-

F134-17 (MUTE) - F134-4 (E)

L - W-B

Mute signal

Audio system operates

3.5 V minimum

Emergency call mode

Below 1 V

F134-18 (MCO+) - F134-4 (E)*1

B - W-B*3

G - W-B*4

Microphone voice signal sent

Refer to the "Microphone Check" section

-

F134-18 (MCO+) - F134-4 (E)*2

B - W-B *3

G - W-B*4

Microphone voice signal sent

Refer to the "Microphone Check" section

-

F134-19 (MCO-) - F134-4 (E)*1

W - W-B*3

R - W-B*4

Microphone voice signal sent

Refer to the "Microphone Check" section

-

F134-19 (MCO-) - F134-4 (E)*2

W - W-B*3

R - W-B*4

Microphone voice signal sent

Refer to the "Microphone Check" section

-

F134-24 (GSW) - F134-4 (E)

W - W-B

Collision detection signal

Ignition Switch in ON position

Pulse generation

(Refer to waveform 1)

F134-26 (SIG-) - F134-4 (E)

SB - W-B

Ground

Always

Below 1 V

F134-27 (SIG1) - F134-4 (E)

L - W-B

Manual (SOS) switch position signal

Manual (SOS) switch not pressed

1,5 à 2,0 V

Manual (SOS) switch pressed

0,5 à 0,8 V

F134-32 (SGND) - F134-4 (E)

Shield - W-B

Shield ground

Always

Below 1 V

F134-33 (MCVD) - F134-4 (E)

B - W-B

Telephone microphone assembly power supply

Ignition Switch in OFF position

Below 1 V

Ignition Switch in ACC position

4 à 6 V

F134-34 (MIC+) - F134-4 (E)*1

W - W-B

Microphone voice signal received

Refer to the "Microphone Check" section

-

F134-34 (MCI+) - F134-4 (E)*2

W - W-B

Microphone voice signal received

Refer to the "Microphone Check" section

-

F134-35 (MCI-) - F134-4 (E)*1

R - W-B

Microphone voice signal received

Refer to the "Microphone Check" section

-

F134-35 (MCI-) - F134-4 (E)*2

R - W-B

Microphone voice signal received

Refer to the "Microphone Check" section

-

F133-1 (USB-) - Body ground

#

USB communication line

-

-

F133-2(USB+) - Body ground

#

USB communication line

-

-

F133-3(USBG) - F134-4 (E)

P - W-B

DCM (telematics transceiver) power supply ground signal

Always

Below 1 Ω

F133-4(VOT+) - F134-4 (E)

G - W-B

Received voice signal

Making a call while using operator assistance

A waveform synchronized with the received voice call is output

F133-5(USBV) - F134-4 (E)

Y - W-B

DCM (telematics transceiver) power supply signal

Ignition Switch in OFF position

Below 1 V

Ignition Switch in ON position

4,5 à 5,25 V

F133-6(USBS) - F134-4 (E)

Shielded - W-B

Shield ground

Always

Below 1 Ω

F133-7(VOT-) - F134-4 (E)

W - W-B

Received voice signal

Making a call while using operator assistance

A waveform synchronized with the received voice call is output

F133-8(VOR-) - F134-4 (E)

B - W-B

Voice reception signal

Receiving a call while using operator assistance

A waveform synchronized with the outgoing voice call is output.

F133-9(VOR+) - F134-4 (E)

R - W-B

Voice reception signal

Receiving a call while using operator assistance

A waveform synchronized with the outgoing voice call is output.

  • *1: without navigation system
  • *2: with navigation system
  • *3: Manufactured by TMMT
  • *4: Manufactured by TMC
  • #: There is no information regarding the wire color.

(a) Oscilloscope waveform:

(1) Waveform 1

Item

Condition

Tester Connection

F134-24 (GSW) - F134-4 (E)

Oscilloscope Setting

5.0 V/DIV., 20 ms/DIV.

Vehicle Operating Conditions

Ignition Switch in ON position

CHECK RADIO AND DISPLAY SYSTEM

Without navigation system: Click here

With navigation system: Click here