Mobile Communication

Health Check

~1min read

HEALTH CHECK

HEALTH CHECK

Health Check provides an overall view of the vehicle's condition, including telematics. The "Health Check" procedure is used to obtain the DCM (telematics transceiver) software version, the PRL version, and the DTCs and malfunction codes related to the telematics system.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Click "Health Check".

Malfunction Code

Cause

62

VIN not recognized by the telematics service provider.

64

DCM (telematics transceiver) not recognized.

65

The Vehicle Identification Number does not match the DCM (telematics transceiver).

HINT:

  • If the "Health Check" procedure results in a problem with the telematics system, a specific malfunction code is displayed.
  • If a malfunction code occurs, follow the corresponding procedure.
  • Malfunction 62*: Press the manual SOS switch and inform the operator of the error message.
  • Malfunction 64: Press the manual SOS switch and inform the operator of the error message.
  • Malfunction 65: Contact the call center and ask them to correct the DCM/VIN registration information in their database.

    *: Check whether the Vehicle Identification Number is correct in the ECM. Perform the "Vehicle Inquiry" procedure on the Techstream and check whether the Vehicle Identification Number is correct.

(e) The data is displayed under "Telematics".

*a

Example

-

-