Honda Accord Quiz
Body

Luggage Compartment Lid Lock Latch and Cylinder Removal and Installation

In this manual: Body
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

Latch
PROCEDURE

1. Open the luggage compartment lid and outline the latch assembly with a marker.
2. Disconnect the wiring connector.

3. Выверните два крепежных болта и снимите сборку защелки.

3. Remove the two mounting bolts and remove the latch assembly.

4. Отсоедините от защелки трос привода ее отпускания.

4. Disconnect the latch release cable from the latch.

5. Installation is performed in the reverse order.

Lock Cylinder
PROCEDURE

1. Откройте крышку багажника и отыщите отверстие доступа позади сборки заднего

1. Open the luggage compartment lid and locate the access hole behind the rear combination lamp assembly. Through the hole, release the lock cylinder actuating rod from its retainer, then remove the mounting bolt. On vehicles so equipped, disconnect the wiring connector from the lock.

2. Rotate the lock 45° and remove the assembly from the luggage compartment lid.
3. Installation is performed in the reverse order.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.