Body

Removal and Installation of Front Cowl Panel

~1min read

PROCEDURE

1. Remove the wiper arms (refer to the Electrical Systems Section).

2. Отпустите три фиксатора и снимите панель обтекателя с автомобиля. Резиновый

2. Release the three clips and remove the cowl panel from the vehicle. The rubber seal may be left attached to the cowl cover.

3. Installation is the reverse of removal. If necessary, remove the old seal and install a new one, fully seating it in the mounting holes of the cover.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.