Honda Accord Quiz
Body

Removal and Installation of Instrument Panel Trim Sections - Instrument Cluster Trim

In this manual: Body
Owner's Manual — 80Maintenance and Adjustments — 43Four-Cylinder Engines — 27V6 Engines — 34Engine General Overhaul and Major Repair — 35Cooling and Heating Systems — 29Fuel and Exhaust Systems — 21Engine Electrical Equipment — 23Engine Control — 315-speed manual transmission (MT) — 74-speed automatic transmission (AT) — 14Clutch and Drive Shafts — 22Brake System — 23Suspension and Steering — 31Body — 41Body Electrical Equipment — 36Electrical Circuit Diagrams — 11
~1min read

PROCEDURE

1. On vehicles so equipped, lower the steering column to the lowest position.

2. Выверните два крепежных винта в верхней части облицовки.

2. Remove the two mounting screws at the top of the trim.

3. Carefully pry with a screwdriver to release the clips and separate the lower part of the cluster trim from the instrument panel. To avoid scratching the panel surface, wrap the screwdriver tip with tape.
4. Installation is the reverse of removal. Make sure the clips are securely engaged.

Test yourself

A quick Honda Accord quiz: every answer comes with an explanation and a link to the manual page.