Engine

Information Display (ascd)

5steps
~30min
2/5difficulty
Done 0 of 5
Component Function Check

CHECK INFORMATION DISPLAY

  1. Start engine.

  2. Press MAIN switch on ASCD steering switch.

  3. Drive the Nissan Murano vehicle at more than 40 km/h.

  4. Press SET- switch.

  5. Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the Nissan Murano vehicle on a flat road.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Proceed to Diagnosis Procedure.

Diagnosis Procedure

CHECK DTC

Check that DTC UXXXX, P0500 or P1574 is not displayed.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Perform trouble diagnosis for DTC UXXXX.

NO>>

Perform trouble diagnosis for DTC P0500. Refer to DTC Description.

NO>>

Perform trouble diagnosis for DTC P1574. Refer to DTC Description.

CHECK DTC WITH COMBINATION METER

Refer to CONSULT Function (METER/MA).

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Perform trouble diagnosis for DTC indicated.

CHECK INTERMITTENT INCIDENT

Refer to Intermittent Incident.

Is the inspection result normal?

YES>>

Replace combination meter. Refer to Removal and Installation.

NO>>

Repair or replace.