Engine

Refrigerant Pressure Sensor

15steps
~90min
4/5difficulty
Done 0 of 15
Component Function Check

CHECK REFRIGERANT PRESSURE SENSOR FUNCTION

  1. Start engine and warm it up to normal operating temperature.

  2. Turn A/C switch and blower fan switch ON.

  3. Check the voltage between ECM harness connector terminals under the following conditions.

    ECMVoltage (V)
    Connector+–
    Terminal
    F78 20 25 1.0 - 4.0

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Proceed to Diagnosis Procedure.

Diagnosis Procedure

CHECK REFRIGERANT PRESSURE SENSOR POWER SUPPLY

  1. Disconnect refrigerant pressure sensor harness connector.

  2. Turn ignition switch ON.

  3. Check the voltage between refrigerant pressure sensor harness connector and ground.

    +−Voltage (V)
    Refrigerant pressure sensor
    ConnectorTerminal
    E244 1 Ground Approx. 5

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

GO TO 2.

CHECK REFRIGERANT PRESSURE SENSOR POWER SUPPLY CIRCUIT

  1. Turn ignition switch OFF.

  2. Disconnect ECM harness connector.

  3. Check the continuity between refrigerant pressure sensor harness connector and ECM harness connector.

Refrigerant pressure sensorECMContinuity
ConnectorTerminalConnectorTerminal
E244 1 F78 18 Existed

Is the inspection result normal?

YES>>

Check sensor power supply 2 circuit. Refer to Diagnosis Procedure.

NO>>

Repair or replace error-detected parts.

CHECK REFRIGERANT PRESSURE SENSOR GROUND CIRCUIT FOR OPEN AND SHORT

  1. Turn ignition switch OFF.

  2. Disconnect ECM harness connector.

  3. Check the continuity between refrigerant pressure sensor harness connector and ECM harness connector.

    Refrigerant pressure sensorECMContinuity
    ConnectorTerminalConnectorTerminal
    E244 3 F78 25 Existed
  4. Also check harness for short to ground and short to power.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace error-detected parts.

CHECK REFRIGERANT PRESSURE SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT

  1. Check the continuity between refrigerant pressure sensor harness connector and ECM harness connector.

    Refrigerant pressure sensorECMContinuity
    ConnectorTerminalConnectorTerminal
    E244 2 F78 20 Existed
  2. Also check harness for short to ground and short to power.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace error-detected parts.

CHECK INTERMITTENT INCIDENT

Check intermittent incident. Refer to Intermittent Incident.

Is the inspection result normal?

YES>>

Replace refrigerant pressure sensor. Refer to Removal and Installation.

NO>>

Repair or replace error-detected parts.