Camera ECU Malfunction (C1610). Cellular Phone Inspection. Cellular Phone Registration Failure
Camera ECU Malfunction (C1610)
DESCRIPTION
This DTC is stored when a malfunction occurs in the parking assist monitor system*1 or panoramic view monitor system*2.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
C1610 |
Camera ECU Malfunction |
|
|
- *1: w/ Parking Assist Monitor System
- *2: w/ Panoramic View Monitor System
NOTICE:
- Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here

- When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
PROCEDURE
CHECK MODEL
(a) Choose the model to be inspected.
Result | Proceed to |
|---|---|
w/ Parking Assist Monitor System |
A |
w/ Panoramic View Monitor System |
B |
| B | GO TO STEP 4 |
|
CHECK DTC (PARKING ASSIST MONITOR SYSTEM)
(a) Clear the DTCs.
Chassis > Parking Assist Camera > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Parking Assist Camera > Trouble CodesOK:
No DTCs are output.
| NG | GO TO PARKING ASSIST MONITOR SYSTEM |
|
CHECK DTC (NAVIGATION SYSTEM)
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
| OK | END |
| NG | REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
CHECK DTC (PANORAMIC VIEW MONITOR SYSTEM)
(a) Clear the DTCs.
Chassis > Panoramic View Monitor > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Panoramic View Monitor > Trouble CodesOK:
No DTCs are output.
| NG | GO TO PANORAMIC VIEW MONITOR SYSTEM |
|
CHECK DTC (NAVIGATION SYSTEM)
(a) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble CodesOK:
No DTCs are output.
| OK | END |
| NG | REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
Cellular Phone Inspection
PROCEDURE
CHECK USAGE CONDITION
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
- The cellular phone is "Bluetooth" compatible.
Click here

- The cellular phone is registered as a hands-free device.
- "Bluetooth" setting of the cellular phone is on.
- Operating system and software of the cellular phone are the latest versions.
- There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
- The "Wi-Fi" setting of the cellular phone is off.
- The "Wi-Fi" tethering setting of the cellular phone is off.
(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result | Proceed to |
|---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
| A | END |
|
RESTART CELLULAR PHONE
(a) Restart the cellular phone.
(b) Turn the engine switch off.
(c) Turn the engine switch on (ACC).
(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result | Proceed to |
|---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
| A | END |
|
CHECK OPERATION
(a) Check if the in-vehicle device can be recognized by the cellular phone.
Result | Proceed to |
|---|---|
In-vehicle device can be recognized. |
A |
In-vehicle device cannot be recognized. |
B |
| B | GO TO STEP 5 |
|
REGISTER AGAIN
(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.
(b) Register the cellular phone again.
(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
Result | Proceed to |
|---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
| A | END |
|
CHECK USING ANOTHER VEHICLE
(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
Result | Proceed to |
|---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
| A | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
|
CHECK USING ANOTHER CELLULAR PHONE
(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
Result | Proceed to |
|---|---|
The cellular phone is connected correctly. |
A |
The cellular phone is not connected correctly. |
B |
| A | END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
| B | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Cellular Phone Registration Failure
NOTICE:
- Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here

- When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
PROCEDURE
CHECK USAGE CONDITION
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
- The cellular phone is "Bluetooth" compatible.
Click here

- "Bluetooth" setting of the cellular phone is on.
- Operating system and software of the cellular phone are the latest versions.
- There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
- The "Wi-Fi" setting of the cellular phone is off.
- The "Wi-Fi" tethering setting of the cellular phone is off.
(b) Register the cellular phone again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | END |
|
RESTART CELLULAR PHONE
(a) Restart the cellular phone.
(b) Turn the engine switch off.
(c) Turn the engine switch on (ACC).
(d) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | END |
|
BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE
(a) Place the cellular phone close to the radio and display receiver assembly.
(b) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | END |
|
CLEAR REGISTERED DEVICE INFORMATION
(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.
(b) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | END |
|
RESTART CELLULAR PHONE
(a) Restart the cellular phone.
(b) Turn the engine switch off.
(c) Turn the engine switch on (ACC).
(d) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | END |
|
CHECK USING ANOTHER VEHICLE
(a) Check if the cellular phone can be registered normally to another "Bluetooth" compatible vehicle of the same model.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
|
CHECK USING ANOTHER CELLULAR PHONE
(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result | Proceed to |
|---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
| A | END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
| B | REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |