System Description
SYSTEM DESCRIPTION
AUTOMATIC LIGHT CONTROL SYSTEM
(a) When the light control switch is in the AUTO position, the automatic light control system detects the ambient brightness level and controls the headlights, fog lights, tail lights, parking lights and license plate lights.
AUTO LIGHT OFF SYSTEM (without Toyota Passenger Detection)
(a) The auto light off system is used to prevent the exterior lights from being left on accidentally (headlights, front fog lights*1, tail lights, parking lights and license plate lights).
- *1: with fog light
(b) When all of the following conditions are met, the headlights, front fog lights*1, tail lights, parking lights and license plate lights turn off:
- The ignition switch is changed from the ON position to the OFF position.
- The headlights, front fog lights, tail lights, parking lights and license plate lights are on.
- The driver's door is open.
- *1: with fog light
AUTOMATIC LIGHT OFF SYSTEM (with Toyota Passenger Detection Security)
(a) The automatic light off system is used to prevent exterior lights from being accidentally left on (headlights, front side marker lights, parking lights, tail lights, rear side marker lights, license plate lights).
- This system has the following functions.
Function | General Description |
|---|---|
Delay Function |
The exterior lights automatically turn off after approximately 30 seconds when all of the following conditions are met:
|
Function Linked to the Door Control Transmitter |
The exterior lights turn off immediately when the delay function is active and the following condition is met:
|
Light Linked to Door Opening |
The exterior lights turn off immediately and automatically when all of the following conditions are met:
|
DAYTIME RUNNING LIGHT SYSTEM
(a) The daytime running light system is designed to automatically turn on the daytime running lights during the day so that the vehicle is more visible to other drivers.
- This system is controlled by the main body ECU (multiplex network body ECU).
- This system is activated when the following conditions are met:
- Ignition switch in the ON position.
- The engine speed signal is output (the engine is running).
- The light control switch is in the AUTO position (and the tail lights are not turned on by the automatic light control system).
- The parking brake switch is in the OFF position.
OUTER MIRROR PUDDLE LIGHT CONTROL (with Outer Mirror Puddle Light)
(a) General
- The outer mirror puddle light control mainly consists of the gradual on/off function and the timed illumination function.
- This control is performed by the main body ECU (multiplex network body ECU). Based on various inputs, the main body ECU (multiplex network body ECU) performs gradual on/off control of the outer mirror puddle lights.
(b) The outer mirror puddle light control has the following control functions:
Function | General Description |
|---|---|
Linked to the Operating Area |
When all of the following conditions are met, the operating lights gradually turn on:
|
When the following condition is met, the operating lights gradually turn off:
|
|
Linked to Door Lock/Unlock |
When all of the following conditions are met, the operating lights gradually turn on:
|
When the following conditions are met, the operating lights gradually turn off:
|
|
Linked to the Ignition Switch |
When the following condition is met, the operating lights gradually turn off:
|
Delay |
When approximately 15 seconds have elapsed after one of the following conditions is met, the operating lights gradually turn off: The function linked to door unlocking is activated. |
FOLLOW ME HOME SYSTEM (without Toyota Passenger Detection Security)
(a) The follow me home system is designed to turn on the headlights for approximately 30 seconds after the vehicle is parked.
(1) This system is controlled by the main body ECU (multiplex network body ECU).
(2) This system is activated when the following conditions are met:
- The ignition switch is in the OFF position.
- The light control switch is in the AUTO position.
- The light control switch is pulled to flash the headlights once.
LANE CHANGE TURN SIGNAL CONTROL
(a) This control is performed by the combination meter assembly.
(b) When the combination headlight/turn signal switch assembly is moved to the lane change position (the switch does not need to be held) during a lane change, the turn signal flashes a set number of times.
(c) While the turn signal is flashing after the combination headlight/turn signal switch assembly has been moved to the lane change position, the turn signal indicator turns off as soon as the combination headlight/turn signal switch assembly is operated in the opposite direction.