Exterior Lighting
Initialization
In this manual: Exterior Lighting
~1min read
INITIALIZATION
LEFT HEADLIGHT ECU SUBASSEMBLY INITIALIZATION (for LED headlight)
NOTICE:
- If any of the operations in the table below have been performed, vehicle information registration and left headlight ECU subassembly initialization are required.
Work performed or system conditions
Necessary Procedures
Link
Replacement of left headlight ECU subassembly
Vehicle information registration for left headlight ECU subassembly
.gif)
Initialization of left headlight ECU subassembly
Work that changes vehicle height, such as replacement or removal/installation of the rear left height control sensor subassembly, or replacement of suspension components
Initialization of left headlight ECU subassembly
- A new left headlight control ECU subassembly cannot operate until the vehicle information is registered.
- After replacing the left headlight ECU subassembly, it is necessary to register the vehicle information and then perform initialization.
- IF the right headlight ECU subassembly is replaced with a new part, resetting and vehicle information registration are not necessary.
Was this page helpful?