Exterior Lighting

Left headlight ECU variation error (B2456)

~2min read

DESCRIPTION

This DTC is stored when a left headlight ECU subassembly that is incompatible with the vehicle is installed.

The left headlight ECU subassembly outputs DTC B2456.

DTC No.

Detection Item

DTC Detection Condition

Suspected Area

Note

B2456

Left headlight ECU variation error

Left headlight ECU subassembly does not match

  • Left Headlight ECU Subassembly
  • ECM
  • Main body ECU (multiplex network body ECU)

-

PRECAUTION / NOTICE / HINT

NOTICE:

  • After replacing the left headlight ECU subassembly, vehicle information initialization and registration are required.

    Click here

  • Before replacing the ECM or main body ECU (multiplex network body ECU), refer to the registration section.*1

    Click here

    • *1: with Smart Key System

PROCEDURE

  1. CLEAR DTCs

(a) Clear the DTCs.

Click here

Body Electrical > HL AutoLeveling > Clear DTCs
NEXT
  1. CHECK WHETHER DTCs ARE OUTPUT

(a) Turn the ignition switch to ON.

(b) Turn on the headlights using the lighting control switch.

(c) Check the DTCs.

Click here

Body Electrical > HL AutoLeveling > Trouble Codes

Result:

Result

Proceed to

DTC B2456 is not output

A

DTC B2456 is output

B

A

USE SIMULATION METHOD TO CHECK

B
  1. CHECK ECM

(a) Make sure the ECM reference number matches the vehicle.

Result:

Result

Proceed to

ECM reference number matches the vehicle

A

ECM reference number does not match

B

B

REPLACE ECM

A
  1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Make sure the main body ECU (multiplex network body ECU) reference number matches the vehicle.

Result:

Result

Proceed to

Main body ECU (multiplex network body ECU) reference number matches the vehicle

A

Main body ECU (multiplex network body ECU) reference number does not match

B

A

REPLACE LEFT HEADLIGHT ECU SUBASSEMBLY

B

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)