Rear Wheel Speed Sensor

GENERAL INFORMATION

Rear Wheel Speed Sensor Connector

524. REAR WHEEL SPEED SENSOR CONNECTOR.

581. REAR SUSPENSION KNUCKLE

The rear wheel speed sensor is integrated into the hub. If the sensor fails, the entire hub assembly

must be replaced.

Remove or disconnect

Removal of the Brake Drum

580. BRAKE DRUM.

581. REAR SUSPENSION KNUCKLE

Removal of the Rear Hub

583. BACKING PLATE.

584. REAR HUB ASSEMBLY

PROCEDURE.

1. Disconnect the negative battery cable.

2. Raise and properly support the vehicle.

3. Rear wheel speed sensor connector, illus. Rear wheel speed sensor.

connector..

4. Remove the four bolts and remove the rear wheel.

5. Remove the screw and remove the brake drum, illus. Removal of the brake drum.

drum. To prevent damage to the brake line, secure the backing plate.

brake backing plate..

6. Remove the four nuts and remove the hub assembly from the rear suspension knuckle, illus. Removal of the rear hub..

Installation

PROCEDURE.

1. Install the hub on the backing plate. Install the four nuts. Tighten the nuts.

rear hub mounting nuts to 80 N·m..

2. Rear wheel speed sensor connector..

3. Brake drum, install the screw..

4. Rear wheel, install the four bolts..

5. Lower the vehicle.

6. Negative battery cable.