Daewoo Nexia Quiz
Brake System

Electronic Brake Control Module

In this manual: Brake System
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read
0102030405043N·mlb·ft
Tightening torque found on this page

GENERAL INFORMATION.

The EBCM is located under the instrument panel, to the left of the steering column.

Remove or disconnect

Демонтаж электронного блока управления торможением (ТЭБУ)
Removal of Electronic Brake Control Module (EBCM)

540. EBCM.

548. INSTRUMENT PANEL.

570. ELECTRICAL FUSE PANEL COVER

PROCEDURE.

1. Disconnect the negative battery cable.

2. Left side panel..

3. Remove three nuts and remove the EBCM from under the instrument panel..

4. Disconnect the EBCM electrical connectors and remove it from the vehicle..

Installation

PROCEDURE.

1. Install the EBCM in the vehicle and connect the electrical connectors..

2. Secure the EBCM to the instrument panel with three nuts. Tighten the

EBCM mounting nuts to 4 N·m..

3. Left side panel.

4. Negative battery cable.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.