Technical Data

Brake Drum

Inner diameter 198.6 mm.

Maximum out-of-round 0.1 mm.

Maximum diameter after boring 201.0 mm.

Brake Disc

Outer diameter 236.0 mm.

Maximum disc runout 0.1 mm.

Maximum disc thickness variation 0.01 mm.

Nominal thickness 12.7 mm.

Minimum thickness after refinishing 10.7 mm*.

Minimum thickness 9.7 mm.

* The disc may be refinished to this dimension only once.

Install new brake pads. Then replace the disc.

Brake Master Cylinder

Standard cylinder bore 22.20 mm.

Maximum cylinder bore 22.27 mm.

Wheel Brake Cylinder

Standard cylinder bore 17.46 mm.

Maximum cylinder bore 17.53 mm.

Minimum piston diameter 17.39 mm.

Threaded connection tightening torques.

Rear wheel speed sensor wiring harness bolt 5.4 N·m.

Rear wheel speed sensor bolt 7.8 N·m.

Front wheel speed sensor bolt 7.8 N·m.

Wheel cylinder bolt 9 N·m.

Caliper bracket bolt, brake hose fitting 25 N·m.

Brake hose fitting bolt 25 N·m.

ABS relay mounting bolt 8 N·m.

Brake caliper bracket bolt 80 N·m.

Parking brake lever bolt 25 N·m.

Motor block mounting bolts (Torx head) 4.5 N·m.

Modulator block mounting bolts 5.4 N·m.

Brake disc mounting bolts 28 N·m.

Solenoid valve mounting bolts (Torx head) 4.5 N·m.

Disc brake dust shield bolts 4 N·m.

Brake drum to hub flange screw 4 N·m.

Brake disc to hub flange screw 4 N·m.

Vacuum hose nut, engine intake manifold 5 N·m.

Vacuum hose nut, engine intake manifold 15 N·m.

Brake pedal shaft nut 18 N·m.

Master cylinder nuts 18 N·m.

Master cylinder to booster nuts 18 N·m.

Pedal bracket to dash panel nuts 20 N·m.

Bracket and booster to body dash panel nuts 22 N·m.

ECU cover nuts 6 N·m.

ECU nuts 4 N·m.

Booster to bracket nuts 22 N·m.

Modulator gear nuts 8.5 N·m.

Bleeder valve 9 N·m.

Bleeder valves for hydraulic system (on calipers and wheel cylinders) 9 N·m.

Battery negative cable clamp nut 15 N·m.

Caliper mounting bolts 95 N·m.

Disc brake caliper mounting bolts 95 N·m.

Seat mounting 20 N·m.

Banjo bolt, brake hose fitting to disc brake caliper 25 N·m.

Disc brake caliper banjo bolt 25 N·m.

Proportioning valve 20 – 25 N·m.

Brake line connections 16 N·m.

Proportioning valve special mounting bolts 24 N·m.

Caliper guide bolts 95 N·m.

Brake caliper guide bolts 95 N·m.

Brake line flare nuts 15 N·m.

Line fittings 16 N·m