Piston Boot

Remove or disconnect

Disassembly of caliper. A. Torx wrench.

4. CALIPER HOUSING, INNER PART.

24. CALIPER HOUSING, OUTER PART

A. CHISEL.

7. PISTON DUST BOOT.

12. HUB

PROCEDURE.

1. Unscrew bolts 23 and separate the outer 4 and inner 24 parts of the caliper housing.

caliper.

2. Lock screw 17 and disc

13..

3. Loosen the seat of boot 7 in the caliper housing using a chisel and remove the boot.

screwdriver.

Installation

PROCEDURE.

1. Install boot 7 into the piston groove and press the boot into the caliper housing bore.

housing. If necessary, press the piston slightly out of the cylinder.

to install the boot.

2. Install boot 7 using tool KM-

405..

3. Disc and lock screw.

4. Bolts

23. Tighten the through bolts to 95 N·m.