Daewoo Nexia Quiz
Brake System

Bleed valve for hydraulic modulator block

In this manual: Brake System
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect

Демонтаж клапана для удаления воздуха из блока модуляторов
Removal of bleed valve for hydraulic modulator block

515. BLEED VALVE FOR HYDRAULIC MODULATOR BLOCK.

516. MODULATOR BLOCK ASSEMBLY WITH ELECTRIC MOTORS.

560. EXPANSION TANK HOSE

PROCEDURE.

1. Place a container under the bleeder valve on the modulator block.

of suitable size or a rag to collect the leaking brake fluid..

2. Unscrew and remove the valve from the modulator block..

Installation

PROCEDURE.

1. Bleeder valve. Do not fully tighten..

2. Bleed air from the brake hydraulic system.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.