Daewoo Nexia Quiz
Brake System

Parking Brake Lever Handle

In this manual: Brake System
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect:

PROCEDURE.

Knock the handle off the parking brake lever using a plastic or wooden wedge.

Installation

PROCEDURE.

1. Install the new handle onto the lever as far as possible. Make sure that the profiled

side of the handle is at the bottom.

2. Heat the handle with hot air to a temperature of about 70° C.

3. Install the handle onto the lever until it stops.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.