Fiat Bravo Quiz
Electrical system

Removing and Installing the Horn

In this manual: Electrical system
Dear Reader — 1Engine — 35Engine lubrication — 3Engine cooling — 10Ignition/spark plugs — 14Fuel system — 10Petrol fuel injection — 13Diesel injection system — 13Exhaust system — 7Clutch — 7Transmission / Gearshift / Automatic Transmission — 5Front Axle — 11Rear axle — 4Steering — 9Wheel alignment — 1Brake system — 22Wheels and tyres — 10Body — 34Heating — 6Electrical system — 39Lighting system — 14Instruments — 7Windscreen wiper system — 8Vehicle care / tools — 6Jump Starting / Towing the Vehicle — 3Jacking up the vehicle — 1Fiat Bravo / Brava Maintenance Schedule — 1Maintenance — 38Wiring diagrams — 5
~1min read

The Bravo/Brava uses 2 twin-tone horns, which can also be sounded with the ignition switched off via the steering wheel button. They are switched by a relay, and the circuit is protected by a fuse.

The horns are located in the engine compartment behind the right headlight.

Removal

  • Remove the right headlight, see page 270.

Hupe aus- und einbauen

  • Disconnect the connector.

  • Unscrew the horns together with the bracket and remove them.

Installation

  • Screw the horns to the bracket.

  • Connect the electrical wires.

  • Install the right headlight, see page 270.

Test yourself

A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.