Fiat Bravo Quiz
Body

Adjust sliding roof

In this manual: Body
Dear Reader — 1Engine — 35Engine lubrication — 3Engine cooling — 10Ignition/spark plugs — 14Fuel system — 10Petrol fuel injection — 13Diesel injection system — 13Exhaust system — 7Clutch — 7Transmission / Gearshift / Automatic Transmission — 5Front Axle — 11Rear axle — 4Steering — 9Wheel alignment — 1Brake system — 22Wheels and tyres — 10Body — 34Heating — 6Electrical system — 39Lighting system — 14Instruments — 7Windscreen wiper system — 8Vehicle care / tools — 6Jump Starting / Towing the Vehicle — 3Jacking up the vehicle — 1Fiat Bravo / Brava Maintenance Schedule — 1Maintenance — 38Wiring diagrams — 5
~1min read

Note: lubricate all sliding parts with multi-purpose grease, for example "Molykote PG 30 L".

Adjust opening mechanism

  • Unscrew glass panel - 1 - from carriages - 6 - and remove. - 9 - Refer to figure T-48329.

Öffnungsvorrichtung einstellen

  • Position sliding rollers - 1 - of the carriages exactly at the start of guide slot - 2 - in front of the notch -arrow-.

Öffnungsvorrichtung einstellen

  • Install motor so that notch - a - is opposite microswitch - 3.

  • Install glass panel.

Adjust glass panel
Glasscheibe einstellen

  • If necessary, adjust alignment of glass panel with roof profile at the eyelets in frame - 4.

Adjust wind deflector
Windabweiser einstellen

  • Align wind deflector - 5 - with roof profile. To do so, loosen the screws at both eyelets -arrow- left and right, and move the eyelets accordingly.

    Then retighten the screws.

Test yourself

A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.