Fiat Bravo Quiz
Body

Removing and installing rear bumper

In this manual: Body
Dear Reader — 1Engine — 35Engine lubrication — 3Engine cooling — 10Ignition/spark plugs — 14Fuel system — 10Petrol fuel injection — 13Diesel injection system — 13Exhaust system — 7Clutch — 7Transmission / Gearshift / Automatic Transmission — 5Front Axle — 11Rear axle — 4Steering — 9Wheel alignment — 1Brake system — 22Wheels and tyres — 10Body — 34Heating — 6Electrical system — 39Lighting system — 14Instruments — 7Windscreen wiper system — 8Vehicle care / tools — 6Jump Starting / Towing the Vehicle — 3Jacking up the vehicle — 1Fiat Bravo / Brava Maintenance Schedule — 1Maintenance — 38Wiring diagrams — 5
~1min read

Note: the illustrations show the Brava.

Removal
Stoÿfänger hinten aus- und einbauen

  • Remove the left inner fender from the bumper.

Stoÿfänger hinten aus- und einbauen

  • Unscrew the fastening nut and remove the left inner fender. Bravo: unscrew 2 nuts.

  • Remove the right inner fender in the same way.

Stoÿfänger hinten aus- und einbauen

  • Unscrew the rear bumper from the left and right rear fenders.

  • Open the trunk lid.

Stoÿfänger hinten aus- und einbauen

  • Unscrew the rear bumper from the rear crossmember trim.

Stoÿfänger hinten aus- und einbauen

  • Pull the rear bumper slightly rearward and disconnect the plug connectors for the license plate lights.

  • Remove the rear bumper rearward with an assistant.

Installation

  • Position the rear bumper with an assistant and screw it on.

  • Screw the front bumper to the fenders.

  • Install the rear inner fenders.

Test yourself

A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.