Fiat Bravo Quiz
Body

Removing and installing front bumper

In this manual: Body
Dear Reader — 1Engine — 35Engine lubrication — 3Engine cooling — 10Ignition/spark plugs — 14Fuel system — 10Petrol fuel injection — 13Diesel injection system — 13Exhaust system — 7Clutch — 7Transmission / Gearshift / Automatic Transmission — 5Front Axle — 11Rear axle — 4Steering — 9Wheel alignment — 1Brake system — 22Wheels and tyres — 10Body — 34Heating — 6Electrical system — 39Lighting system — 14Instruments — 7Windscreen wiper system — 8Vehicle care / tools — 6Jump Starting / Towing the Vehicle — 3Jacking up the vehicle — 1Fiat Bravo / Brava Maintenance Schedule — 1Maintenance — 38Wiring diagrams — 5
~1min read
Removal

  • Open the hood.

Stoÿfänger vom aus- und einbauen

  • Unscrew the upper front bumper from the front crossmember trim.

Stoÿfänger vom aus- und einbauen

  • Remove the front bumper from the left and right inner fender. Unscrew 3 screws and lift off 1 clip (not visible in illustration).

Stoÿfänger vom aus- und einbauen

  • Unscrew the front bumper from the front fenders.

Stoÿfänger vom aus- und einbauen

  • Unscrew the lower screws and remove the front bumper forward with an assistant.

Installation

  • Position the front bumper with an assistant and screw it on at the bottom.

  • Screw the front bumper to the fenders.

  • Install the front wheel arch liner.

  • Screw the upper front bumper on.

  • Close the hood.

Test yourself

A quick Fiat Bravo quiz: every answer comes with an explanation and a link to the manual page.