Body Electrical System
Headlamp Leveling System
In this manual: Body Electrical System
3steps
~18min
2/5difficulty
Done 0 of 3
Contents:
Headlamp Leveling Switch Terminal Function
Connector and Terminal Function

| Connector A | Terminal | Function | Terminal | Function |
![]() |
1 | ESC OFF switch | 9 | IG 1 |
| 2 | ISG OFF switch | 10 | IG1_HILLD | |
| 3 | Battery ( + ) | 11 | HUD signal | |
| 4 | Rheostat (Up) | 12 | power tailgate switch | |
| 5 | HILLD signal | 13 | Rheostat (Down) | |
| 6 | Detent | 14 | Illumination ( + ) | |
| 7 | HILLD ground | 15 | ISG indicator | |
| 8 | Ground | 16 | Illumination ( - ) |
Headlamp Leveling Switch Removal and Installation
Removal
- Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel")
- Remove the crash pad side switch (A) after removing the screws.

- Disconnect the crash pad side switch connector (A).

Installation
- Install in reverse order of removal.
Was this page helpful?
