Remove the front door trim [Driver's Side]. (Refer to Body - "Front Door Trim")
Remove the power door mirror switch (A) by pulling the hook in the direction of the arrow.
Installation
Install in reverse order of removal.
Power Door Mirror Actuator Terminal Function
Connector and Terminal Function
[Standard Type]
Connector A
Terminal
Function
Terminal
Function
1
Power outside mirror switch (V)
7
Power outside mirror unfolding relay
2
Power outside mirror switch (CL)
8
Turn signal lamp
3
Power outside mirror switch (HL)
9
-
4
Mirror heater ( + )
10
BCW IND ( - )
5
Mirror heater ( - ) / Turn signal lamp ( - )
11
BCW IND ( + )
6
Outside mirror folding relay
12
-
[Option Type]
Connector A
Terminal
Function
Terminal
Function
1
Power outside mirror switch (V)
11
BCW IND ( + )
2
Power outside mirror switch (CL)
12
-
3
Power outside mirror switch (HL)
13
-
4
Mirror heater ( + )
14
-
5
Mirror heater ( - ) / Turn signal lamp ( - )
15
-
6
Outside mirror folding relay
16
-
7
Outside mirror unfolding relay
17
-
8
Turn signal lamp ( + )
18
-
9
-
19
Camera
10
BCW IND ( - )
Power Door Mirror Actuator Removal and Installation
Removal
Disconnect the negative ( - ) battery terminal.
Remove the mirror. (Refer to Body - "Outside Rear View Mirror")
Remove the mirror actuator (A) after removing the screws.
Disconnect the mirror actuator connector (A).
Installation
Install in reverse order of removal.
Power Door Mirror Actuator Inspection
Inspection
Disconnect the negative ( - ) battery terminal.
Remove the front door quadrant inner cover (A).
Disconnect the outside rear view mirror connector (A).
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly. [Standard Type] [Option Type] [Mirror Actuator]