Body Electrical System
Integrated Body Control Unit (IBU)
In this manual: Body Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Contents:
Description and Operation ➤
On Vehicle Inspection
On Vehicle Inspection
Diagnosis with KDS
- The Integrated Body Control Unit (IBU) can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
- Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
- S/W Management : Controlling other features including system option setting and zero point adjustment. (S/W Management → Integrated Body Control Unit-BCM → Variant Coding)
Refer to the KDS screen for operating conditions and details.
Terminal Function
Connector and Terminal Function
[Non-Smart Key Type]
| Terminal | Function | ||
| Connector A | Connector B | Connector C | |
| 1 | - | - | - |
| 2 | Front heated nozzle (output) | - | - |
| 3 | Rear washer switch (input) | - | Outside mirror folding (output) |
| 4 | Front washer switch (input) | LIN2 (Safety ECU) | PDW Option (input) |
| 5 | - | LIN1 (PDW) | - |
| 6 | Ground (power) | PDW-R power (input) | - |
| 7 | Ground (ECU) | PDW-R power (output) | - |
| 8 | - | PDW-F power (output) | - |
| 9 | Battery ( + ) ECU | ATM solenoid (output) | Auto light sensor ground (output) |
| 10 | Battery ( + ) power | Headlamp high switch (input) | RVM switch (input) |
| 11 | IG1 (input) | Front wiper switch (input) | PDW-R switch (input) |
| 12 | Kline immobilizer | Front wiper volume switch (input) | Key interlock switch (input) |
| 13 | - | Wiper parking switch (input) | - |
| 14 | - | - | Multifunction switch ground (input) |
| 15 | - | PDW-R Indicator (output) | ACC (input) |
| 16 | - | - | IGN2 (input) |
| 17 | - | Front wiper low back-up switch (input) | |
| 18 | - | Brake switch (input) | |
| 19 | - | - | |
| 20 | - | - | |
| 21 | - | - | |
| 22 | LIN3 (Rain sensor) | - | |
| 23 | - | Outside mirror unfolding (output) | |
| 24 | - | - | |
| 25 | Front wiper low relay (output) | B-CAN (High) | |
| 26 | Front wiper high relay (output) | B-CAN (Low) | |
| 27 | Rear wiper relay (output) | P-CAN (High) | |
| 28 | Fog lamp switch (input) | P-CAN (Low) | |
| 29 | Light switch (input) | Auto light sensor power (output) | |
| 30 | Rear wiper switch (input) | Auto light sensor signal (input) | |
| 31 | - | Sunroof status (input) | |
| 32 | - | Key solenoid (output) | |
| 33 | Keyhole illumination (output) | Start inhibit relay (output) | |
| 34 | EMS ECU wake up (Output) Door unlock signal (for IFU) output |
Key in switch (input) | |
| 35 | - | - | |
| 36 | - | - | |
| 37 | Immobilizer antenna power (output) | ||
| 38 | Immobilizer antenna ground (output) | ||
| 39 | - | ||
| 40 | - | ||
[Smart Key Type]

| Terminal | Function | |||
| Connector A | Connector B | Connector C | Connector D | |
| 1 | ESCL ( + ) output | - | - | - |
| 2 | Front heated nozzle (output) | - | - | - |
| 3 | Rear washer switch (input) | - | Outside mirror folding (output) | - |
| 4 | Front washer switch (input) | LIN2 (Safety ECU) | Passenger's door touch sensor unlock (input) | - |
| 5 | - | LIN1 (PDW) | - | ESCL Enable (output) |
| 6 | Ground (power) | PDW-R power (input) | - | RPM (input) |
| 7 | Ground (ECU) | PDW-R power (output) | - | Starter relay (output) |
| 8 | ESCL ( - ) output | PDW-F power (output) | - | ACC relay (output) |
| 9 | Battery ( + ) ECU | ATM solenoid (output) | Auto light sensor ground (output) | Starter feedback (Input) |
| 10 | Battery ( + ) power | Headlamp high switch (input) | RVM switch (input) | SSB Switch 2 (input) |
| 11 | IG1 (input) | Front wiper switch (input) | PDW-R switch (input) | Interior antenna 3 ( - ) output |
| 12 | Kline immobilizer | Front wiper volume switch (input) | AT : 'P' (input) | Interior antenna 1 ( - ) output |
| 13 | - | Wiper parking switch (input) | Passenger's outside handle touch sensor lock (input) | - |
| 14 | - | Buzzer (output) | Multifunction switch ground (input) | Passenger's outside handle antenna ( - ) output |
| 15 | - | PDW-R Indicator (Output) | ACC (input) | Front bumper antenna ( - ) output |
| 16 | - | - | IG2 (input) | - |
| 17 | - | Front wiper low back-up switch (input) | Rear bumper antenna ( - ) output | |
| 18 | - | Brake switch (input) | Driver's outside handle antenna ( - ) output | |
| 19 | - | - | Immobilizer ground (output) | |
| 20 | - | - | - | |
| 21 | - | - | - | |
| 22 | LIN3 (Rain sensor) | PDW Option (input) | - | |
| 23 | - | Outside mirror unfolding (output) | - | |
| 24 | - | Driver's door touch sensor unlock (input) | - | |
| 25 | Front wiper low relay (output) | - | - | |
| 26 | Front wiper high relay (output) | - | Wheel speed sensor (input) | |
| 27 | Rear wiper relay (output) | - | IG2 Relay (output) | |
| 28 | Fog lamp switch (input) | - | IG1 Relay (output) | |
| 29 | Light switch (input) | Auto light sensor power (output) | SSB symbol illumination ( + ) output | |
| 30 | Rear wiper switch (input) | Auto light sensor signal (input) | SSB Switch 1 (input) | |
| 31 | - | Sunroof status (input) | Interior antenna 3 ( + ) output | |
| 32 | - | ESCl Unlock switch (input) | Interior antenna 1 ( + ) output | |
| 33 | COM (ESCL) | Clutch ignition lock switch (input) | - | |
| 34 | EMS ECU wake up (output) | Driver's outside handle touch sensor lock (input) | Passenger's outside handle antenna ( + ) output | |
| Door unlock signal (For IFU) output | ||||
| 35 | - | B-CAN (High) | Front bumper antenna ( + ) output | |
| 36 | - | B-CAN (Low) | - | |
| 37 | P-CAN (High) | Rear bumper antenna ( + ) output | ||
| 38 | P-CAN (Low) | Driver's outside handle antenna ( + ) output | ||
| 39 | - | Immobilizer power (output) | ||
| 40 | - | - | ||
Removal and Installation
Removal
- Remove the crash pad center panel. (Refer to Body - "Crash Pad Panel")
- Remove the Integrated Body Control Unit (IBU) (A) after removing the bolt and nuts.
Tightening torque : 9 - 9,8 N·m

- Remove the wiring clips (A), (B).


- Disconnect the Integrated Body Control Unit (IBU) connectors (A).

Installation
- Install in reverse order of removal.
- Perform the order below with the KDS when replacing the Integrated Body Control Unit (IBU). (S/W Management → Integrated Body Control Unit-BCM → Variant Coding) (S/W Management → Integrated Body Control Unit-SMK → Smart Key Code Saving) (S/W Management → Integrated Body Control Unit-TPMS → Vehicle Name Writing) (S/W Management → Integrated Body Control Unit-TPMS → Wheel Sensor ID Writing) (S/W Management → Identity Authentication Unit → Learning Mode)
Refer to the KDS screen for operating conditions and details
Was this page helpful?