The seat electrical can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
S/W Management : Controlling other features including system option setting and zero point adjustment. (S/W Management → Power Seat Module → Seat Limit Position Setting)
Refer to the KDS screen for operating conditions and details.
Self - Diagnosis Mode (Heater/Ventilation)
Press and hold the seat heater switch for more than 3 seconds.
Release the hand and press the switch again within 3 seconds for 1.5 to 3 seconds.
Again within 3 seconds, hold the switch for more than 3 seconds to enter the self - diagnosis mode.
When entering the self - diagnostic mode, the switch indicator blinks once.
Check the details of the fault according to the blinking and lighting status of the indicator after entering the self - diagnosis mode.
Heater/Ventilation Unit Troubleshooting
Troubleshooting
Heater/Ventilation Unit Terminal Function
Connector and Terminal Function
Front Seat Heater Unit
Connector A
Terminal
Function
Terminal
Function
1
Battery ( + )
15
Battery ( + )
2
Driver seat heater power ( + )
16
Passenger seat heater power ( + )
3
IG 1
17
-
4
B-CAN (Low)
18
-
5
B-CAN (High)
19
-
6
-
20
-
7
Driver's seat heater switch IND (High)
21
Passenger seat heater switch IND (High)
8
Driver's seat heater switch IND (Mid)
22
Passenger seat heater switch IND (Mid)
9
Driver's seat heater switch IND (Low)
23
Passenger seat heater switch IND (Low)
10
Driver's seat heater switch
24
Passenger seat heater switch
11
Driver seat heater NTC ( + )
25
Passenger seat heater NTC ( + )
12
Driver seat heater NTC ( - )
26
Passenger seat heater NTC ( - )
13
Driver seat heater power ( - )
27
Passenger seat heater power ( - )
14
Ground
28
Ground
Front Seat Heater/Ventilation Unit
Terminal
Function
Connector A
Connector B
Connector C
1
Driver seat ventilation switch
Driver's seat heater switch IND (Mid)
Driver seat cushion heater power
2
Passenger seat ventilation switch
Passenger seat heater switch IND (High)
Driver seat back heater power
3
Passenger seat heater switch
Driver's seat heater switch IND (Low)
Passenger seat cushion heater power
4
Driver's seat heater switch
Passenger seat heater switch IND (Low)
Passenger seat back heater power
5
B-CAN (Low)
-
Driver seat ventilation power
6
B-CAN (High)
-
Passenger seat ventilation power
7
Passenger seat blower speed
Illumination ( - )
Battery ( + )
8
Driver seat blower speed
-
Driver seat heater power ( - )
9
Driver's seat heater switch IND (High)
Detent
Ground
10
Driver's seat ventilation switch IND (High)
IG 1
Passenger seat heater power ( - )
11
Passenger seat heater switch IND (Mid)
Driver's seat ventilation switch IND (Mid)
12
Passenger seat ventilation switch IND (Mid)
Passenger seat ventilation switch IND (High)
13
Driver's seat ventilation switch IND (Low)
14
Passenger seat ventilation switch IND (Low)
15
-
16
-
17
NTC ( - )
18
Passenger seat NCT ( + )
19
Driver seat NTC ( + )
20
-
Rear Seat Heater Unit
Terminal
Function
Terminal
Function
1
Battery ( + )
15
Battery ( + )
2
Rear seat heater power ( + )_LH
16
Rear seat heater power ( + )_RH
3
IG 1
17
-
4
B-CAN (Low)
18
-
5
B-CAN (High)
19
-
6
-
20
-
7
Rear seat heater IND (High)_LH
21
Rear seat heater IND (High)_RH
8
-
22
-
9
Rear seat heater IND (Low)_LH
23
Rear seat heater IND (Low)_RH
10
Rear seat heater switch_LH
24
Rear seat heater switch_RH
11
Rear seat heater NTC ( + )_LH
25
Rear seat heater NTC ( + )_RH
12
Rear seat heater NTC ( - )_LH
26
Rear seat heater NTC ( - )_RH
13
Rear seat heater power ( - )_LH
27
Rear seat heater power ( - )_RH
14
Ground
28
Ground
Heater/Ventilation Unit Removal and Installation
Removal
Heater / Ventilation Unit
[Front Seat]
Remove the front seat assembly [Passenger's seat]. (Refer to Body - "Front Seat Assembly")
Disconnect the Occupant Detective Sensor Unit (ODU) connector (A).
Remove the seat heater/ventilation unit bracket (A) after removing the screws.
Disconnect the heater/ventilation unit connectors (A).
Remove the seat heater/ventilation unit (A) after removing the screws.
[Rear Seat]
Remove the rear seat cushion assembly. (Refer to Body - "Rear Seat Assembly")
Disconnect the seat heater unit connector (A).
Remove the seat heater unit (A).
Remove the front seat assembly. (Refer to Body - "Front Seat Assembly")
Remove the seat back ventilation duct (A) after removing the screws.
Remove the ventilation seat blower.
Disconnect the ventilation seat blower connector (A).
Remove the fixing clips (A).
Remove the ventilation seat blower (A) after removing the screws.
Ventilation Seat Blower Seat Heater Pad
Front Seat Cushion
Remove the front seat cushion cover. (Refer to Body - "Front Seat Cushion Cover" )
When replacing the front seat cushion heater pad, replace the front seat cushion pad assembly.
Front Seat Back Cover
Remove the front seat back cover. (Refer to Body - "Front Seat Back Cover")
When replacing the front seat back heater pad, replace the front seat back pad assembly.
Rear Seat Cushion Cover
Remove the rear seat cushion cover. (Refer to Body - "Rear Seat Cushion Cover")
When replacing the rear seat cushion heater pad, replace the rear seat cushion pad assembly.
Installation
Install in reverse order of removal.
Heater/Ventilation Unit Inspection
Inspection
Connector Resistance Measurement [Heater Type]
Specification
4 pin (Seat cushion heater)
4 pin (NTC)
2 pin (Seat back heater)
Terminal
1 - 4
2 - 3
1 - 2
Position
Resistance
2.85 - 3.17 kΩ
At 25 °C 7.6 - 8.4 kΩ
3.27 - 4.00 kΩ
[Heater + Ventilation Type]
Specification
6 Pins (Cushion heater)
6 Pins (NTC)
2 pin (Seat back heater)
Terminal
4 - 6
1 - 3
1 - 2
Position
Resistance
4.33 - 5.3 kΩ
At 25 °C 7.6 - 8.4 kΩ
3.94 - 4.82 kΩ
Heater/Ventilation Switch Description and Operation
Description
Heater Seat Smart Control Technology
To prevent low temperature burn, seat heater temperature will automatically be lowered after a certain period of time. (Low temperature burn condition: Over 30 minutes at 50 °C)
Heater Seat Smart Control Operation
[Front Seat / Rear Seat]
Change to "MID" after 30 minutes in "HIGH", then "LOW" after 60 minutes in "MID"
Change to "LOW" after 60 minutes in "MID"
If temperature is raised manually within certain period of time after the temperature was lowered automatically, it will be lowered again soon to prevent overheating or low temperature burn.
This is normal operating condition as a safety device.
Heater/Ventilation Switch Terminal Function
Terminal Function
Front Seat
[SBC Type]
[Driver's Side]
Terminal
Function
Terminal
Function
1
-
13
Illumination ( + )
2
IG 1
14
-
3
Driver's seat vent switch (input)
15
-
4
Driver's seat heater switch IND (High)
16
Steering wheel heated switch (Input)
5
Driver's seat heater switch IND (Mid)
17
Steering wheel heated switch IND
6
Driver's seat heater switch IND (Low)
18
SVM switch input
7
-
19
Grip control IND
8
Driver's seat vent switch (input)
20
Grip control switch ( + )
9
Driver's seat ventilation switch IND (High)
21
Grip control switch ( - )
10
Driver's seat ventilation switch IND (Mid)
22
-
11
Driver's seat ventilation switch IND (Low)
23
Detent
12
Ground
24
Illumination ( - )
[Passenger's side]
Terminal
Function
Terminal
Function
1
-
15
-
2
-
16
-
3
Passenger seat heater switch (Input)
17
PDW switch (Input)
4
Passenger seat heater switch IND (High)
18
DBC switch (Input)
5
Passenger seat heater switch IND (Mid)
19
AWD Lock switch input
6
Passenger seat heater switch IND (Low)
20
-
7
-
21
PDW switch IND
8
Passenger seat ventilation switch (Input)
22
-
9
Passenger seat ventilation switch IND (High)
23
-
10
Passenger seat ventilation switch IND (Mid)
24
-
11
Passenger seat ventilation switch IND (Low)
25
Illumination ( + )
12
-
26
-
13
-
27
-
14
Ground
28
Illumination ( - )
[SBW Type]
[Driver's Side]
Terminal
Function
Terminal
Function
1
Driver's seat heater switch (Input)
9
Steering wheel heated switch (Input)
2
Driver's seat heater switch IND (High)
10
Steering wheel heated switch IND
3
Driver's seat heater switch IND (Mid)
11
DBC Switch
4
Driver's seat heater switch IND (Low)
12
-
5
Driver's seat ventilation switch (Input)
13
Illumination ( - )
6
Driver's seat ventilation switch IND (High)
14
-
7
Driver's seat ventilation switch IND (Mid)
15
Illumination ( + )
8
Driver's seat ventilation switch IND (Low)
16
Ground
[Passenger's side]
Terminal
Function
Terminal
Function
1
Passenger seat heater switch (Input)
11
PDW switch (Input)
2
Passenger seat heater switch IND (High)
12
RVM switch (Input)
3
Passenger seat heater switch IND (Mid)
13
AWD lock switch (Input)
4
Passenger seat heater switch IND (Low)
14
-
5
Passenger seat ventilation switch (Input)
15
PDW switch IND
6
Passenger seat ventilation switch IND (High)
16
-
7
Passenger seat ventilation switch IND (Mid)
17
-
8
Passenger seat ventilation switch IND (Low)
18
Illumination ( + )
9
-
19
-
10
Ground
20
Illumination ( - )
[Rear Seat]
Terminal
Function
Terminal
Function
1
Battery (+)
7
Power window main switch (Down)
2
Rear seat heater IND (High)
8
Ground
3
Rear power window motor (Up)
9
-
4
Rear seat heater IND (Low)
10
Power window main switch (Up)
5
Rear power window motor (Down)
11
Illumination ( + )
6
Rear seat heater switch signal
12
Power window main switch (Window lock)
Heater/Ventilation Switch Removal and Installation
Removal
Front Seat
[SBW Type]
[Driver's Side]
Remove the console upper cover. (Refer to Body - "Console Upper Cover")
Remove the console lower cover (A) after removing the screws.
Disconnect the driver's seat heater/ventilation switch connector (A).
Remove the driver's seat heater/ventilation switch (A) after removing the screws.
Remove the console upper cover. (Refer to Body - "Console Upper Cover")
Remove the console lower cover (A) after removing the screws.
Disconnect the driver's seat heater/ventilation switch connector (A).
Clip position :
Remove the driver's seat heater/ventilation switch (A) after removing the screws.
[Passenger's Side]
[SBC Type]
[Driver's Side]
Remove the console upper cover. (Refer to Body - "Console Upper Cover")
Remove the console lower cover (A) after removing the screws.
Disconnect the driver's seat heater/ventilation switch connector (A).
Clip position :
Remove the driver's seat heater/ventilation switch (A) after removing the screws.
Remove the console upper cover. (Refer to Body - "Console Upper Cover")
Remove the console lower cover (A) after removing the screws.
Disconnect the passenger's seat heater/ventilation switch connector (A).
Remove the passenger's seat heater/ventilation switch (A) after removing the screws.
Remove the rear power window switch. (Refer to Power Window - "Power Window Switch" )
[Passenger's Side] Rear Seat
Installation
Install in reverse order of removal.
Heater/Ventilation Switch Inspection
Inspection
Front Seat
[Heater Type]
Remove the console upper cover. (Refer to Body - "Console Upper Cover")
Push and hold the switch, check for continuity between signal terminal and ground terminal. [Driver's Side] [Passenger's Side]
Position
Terminal
Function
Switch ON
Switch OFF
Driver side
1 - 16
Continuity
-
Passenger side
1 - 10
Continuity
-
Remove the rear door trim. (Refer to Body - "Rear Door Trim")
Push and hold the switch, check for continuity between signal terminal and ground terminal.
Terminal
Function
Switch ON
Switch OFF
6 - 8
Continuity
-
Rear Seat
Power Seat Control Switch Removal and Installation
Removal
Front Seat
Remove the front seat shield outer cover. (Refer to Body - "Front Seat Shield Outer Cover")
Remove the power seat control switch knob (A).
Remove the power seat control switch assembly (A) after removing the screws.