Suspension and Steering

Body Trim

~1min read

Removal and installation

PROCEDURE

Front Grille
1. Откройте капот, подайте решетку вперед, поверните винты на 1/4 оборота (показано

1. Open the hood, pull the grille forward, turn the screws 1/4 turn (shown by arrow), and remove the grille.

2. При установке вставьте нижние выступы решетки (указан стрелкой) в отверстия.

2. When installing, insert the lower grille tabs (shown by arrow) into the holes. Fender Protection Panels

3. To remove the protection panels, unscrew the self-tapping screws and remove the clips.

Decorative Moldings and Emblems

4. Moldings and emblems are attached with adhesive tape and are removed using a special technique without damaging the body paint. It is recommended that these parts be replaced at an authorized service center or specialist workshop.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.