Luggage Compartment Door Opener Outer Switch
Components
COMPONENTS
ILLUSTRATION
*1 |
LUGGAGE ELECTRICAL KEY SWITCH |
- |
- |
Inspection
INSPECTION
PROCEDURE
1. INSPECT LUGGAGE ELECTRICAL KEY SWITCH
(a) Check the switch.
(1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the luggage electrical key switch. |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL LUGGAGE ELECTRICAL KEY SWITCH
(a) Engage the 2 claws to install the luggage electrical key switch.
(b) Install the 2 screws.
(c) Engage the clamp.
(d) Connect the connector.
2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Click here ![]()
2. REMOVE LUGGAGE ELECTRICAL KEY SWITCH
(a) Disconnect the connector. |
![]() |
(b) Disengage the clamp.
(c) Remove the 2 screws. |
![]() |
(d) Disengage the 2 claws to remove the luggage electrical key switch.


