Rear Power Window Switch
Components
COMPONENTS
ILLUSTRATION
*1 |
REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY |
*2 |
REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BASE PANEL |
Inspection
INSPECTION
PROCEDURE
1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH/RH DOOR)
(a) Check the switch function. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the rear power window regulator switch assembly (for LH/RH door). |
|
(b) Check that the LED illuminates.
(1) Apply auxiliary battery voltage to the power window regulator switch assembly and check that the LED illuminates.
OK:
Battery Connection | Specified Condition |
|---|---|
Auxiliary battery positive (+) → 3 Auxiliary battery negative (-) → 1 |
LED illuminates |
If the result is not as specified, replace the rear power window regulator switch assembly (for LH/RH door).
Installation
INSTALLATION
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 3 claws to install the rear power window regulator switch assembly.
2. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BASE PANEL
Click here ![]()
Removal
REMOVAL
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR UPPER ARMREST BASE PANEL
Click here ![]()
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Disengage the 3 claws to remove the rear power window regulator switch assembly. |
![]() |

