Rear Spoiler
Components
COMPONENTS
ILLUSTRATION
*1 |
LUGGAGE COMPARTMENT DOOR COVER |
*2 |
REAR SPOILER SUB-ASSEMBLY |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR SPOILER SUB-ASSEMBLY
HINT:
When installing a new rear spoiler sub-assembly, heat the luggage compartment door panel and rear spoiler sub-assembly using a heat light.
Heating TemperatureItem | Temperature |
|---|---|
Luggage Compartment Door Panel |
40 to 60 °C |
Rear Spoiler Sub-assembly |
20 to 30 °C |
CAUTION:
- Do not touch the heat light and heated parts, touching the heat light may result in burns.
- Touching heated parts for a long time may result in burns.
*a |
Heated Part |
*b |
Heat Light |
NOTICE:
Do not heat the luggage compartment door panel or rear spoiler sub-assembly excessively.
(a) Clean the luggage compartment door panel surface.
(1) Using a heat light, heat the luggage compartment door panel surface.
(2) Remove any double-sided tape from the luggage compartment door panel.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Using a brush or felt, apply primer or equivalent to the rear spoiler sub-assembly installation area.
NOTICE:
- Use a clean brush or felt.
- Do not touch the luggage compartment door panel until the primer has dried.
(c) Remove the release paper from a new rear spoiler sub-assembly.
(d) Attach the double-sided tape and engage the 5 clips to install the rear spoiler sub-assembly.
HINT:
Press the rear spoiler sub-assembly firmly to install it.
(e) Install the rear spoiler sub-assembly with the 2 nuts.
Torque:
5 N·m {51 kgf·cm, 44 in·lbf}
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE LUGGAGE COMPARTMENT DOOR COVER
Click here ![]()
2. REMOVE REAR SPOILER SUB-ASSEMBLY
(a) Apply protective tape around the rear spoiler sub-assembly as shown in the illustration.
![]() |
Protective Tape |
(b) Remove the 2 nuts. |
![]() |
(c) Separate the double-sided tape and disengage the 5 clips to remove the rear spoiler sub-assembly.
![]() |
Double-sided Tape |


