Vehicle Exterior
Relay
In this manual: Vehicle Exterior
~1min read
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT WIPER RELAY
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the WIPER relay. |
![]() |
2. INSPECT WASHER RELAY
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the WASHER relay. |
![]() |
Was this page helpful?

