Audi A3 Quiz
Body

Removal and Installation of Safety Systems Diagnostic Connector

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

1. Remove the diagnostic connector cover.

2. Pry out the 3 latches (arrows) on the diagnostic connector -2- with a screwdriver -1-.

3. Remove the diagnostic connector.

INSTALLATION

PROCEDURE

1. Install the diagnostic connector in place. It must click into position.

2. Install the connector cover.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.