Audi A3 Quiz
Body

Removal and Installation of Door Sill Trim

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

3-door models

PROCEDURE

1. Remove the A-pillar trim, refer to subsection Removal and Installation of A-Pillar Trim.

2. Disconnect the door sill plate –1– (6 clips).

3. Remove the door sill plate from under the side trim.

4. Install the door sill plate in reverse order of removal. 5-door models

PROCEDURE

1. Remove the lower A-pillar trim, refer to subsection Removal and Installation of A-Pillar Trim.

2. Disconnect the door sill plate at the front –1–.

3. Disconnect the door sill plate at holder –5– from the lower B-pillar trim –2–.

4. Remove the door sill plate with pin –6– at the rear and disconnect it.

5. Disconnect the plate at holder –4– and then at holder –3– from the lower B-pillar trim –2–.

6. Remove the plate.

7. Install the door sill plate in reverse order of removal.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.