Audi A3 Quiz
Body

Removing and installing rear seat and backrest

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVING SEAT

PROCEDURE

1. Pull the seat elements forward by the strap and fold them down.

2. Press spring clip –1– in the direction of the arrow and remove from hinges.

3. Remove the seat cushion. REMOVING BACKREST

CAUTION

The backrest can only be removed and installed in the folded-down position.

PROCEDURE

1. Fold down both backrests.

2. Using a screwdriver, press stops –1– on the left and right and lift the backrest element –2– out of holder –3–.

3. Remove the seat element from the center support and take it out of the vehicle. INSTALLATION OF BACKREST AND SEAT

PROCEDURE

1. Insert the backrest element into the center support.

2. Insert the second side of the backrest element into the support and secure it.

3. Position the backrest vertically.

4. Install the seat.

5. Squeeze clip -1- in the direction of the arrow and insert it into the hinges -2-.

6. Slide the seat element. Make sure that the seat belt does not remain under the seat.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.