Body
Removing and Installing Door and Fender Trim
In this manual: Body
~1min read
GENERAL INFORMATION

Door and Fender Trim
Door Trim REMOVAL
PROCEDURE
1. Open the door.
2. Unscrew the Phillips head screw –3– from below on the inner side of the door.
3. Pull the trim back out of the retainers and remove it. INSTALLATION
PROCEDURE
1. Install the trim and shift it forward until it locks into place.
2. Lightly tighten the Phillips head screw –3– to 1 N·m.
Rear Fender Trim REMOVAL
PROCEDURE
Pull out and remove the rear fender trim. INSTALLATIONPROCEDURE
Install the trim in place and secure it.Test yourself
A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?