Audi A3 Quiz
Body

Removing and installing seat track cover on tunnel side

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

Возьмите пальцем под крышкой –1– (по направлению стрелки А на иллюстрации) и

Place a finger under cover –1– (in the direction of arrow A in the illustration) and press stop 2 in the direction of arrow (B). At the same time, pull cover –1– in the direction of arrow (C) and remove it.

INSTALLATION

PROCEDURE

1. Install cover –1–. While doing so, press the carpet in the direction of arrow (D).

2. Insert track –4– into groove –6–.

3. Engage stops –3– and –5– on strip –9– in groove –8–.

4. Press cover –1– so that stop –2– engages in the cutout.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.